Victory Alpha 0.4.3 / Windows and Linux testing release
Downloads &
installation
You need your own installed copy of Wing Commander III: Heart of the Tiger to play the remake.
Linux player? Download Alpha 0.4.3 for Linux and follow the Linux installation guide. The steps below are for Windows.
Already playing an earlier alpha? Update to Alpha 0.4.3 keeps your saves, controls and imported videos. Read the changelog.
1. Prepare your PC and original game
- Use 64-bit Windows with a DirectX 12 / Shader Model 6 capable graphics card. Installation has been tested on Windows 11.
- Install your own copy of Wing Commander III: Heart of the Tiger. Victory works with the GOG DOS release (its folder contains
DATA.DAT) and with EA’s 30th Anniversary Edition from GOG or Steam (select its main folder). The installer finds GOG and Steam copies by itself. You will select this folder during setup. Keep the original game installed. - Keep an internet connection available for first-time setup. Allow space for the 4.22 GB download, extracted installer, approximately 4.5 GiB of installed files, and additional generated game data. Optional HD videos need more space.
Optional / Community remaster by ODVS
2. Optional: ODVS’s 4K Video Pack
For the 30th Anniversary Edition
The edition brings its own remastered cinematics and HD comm videos, so you need no download. Victory asks which cinematics to play: Remastered, Remastered upscaled or the original 1995 cinematics, and the launcher’s Cinematics list changes it later. ODVS’s Wing Commander III 4K Video Pack replaces the edition’s upscaled cinematics with 4K versions: more detail, better compression, the CG shots at 30 frames per second like the live action, and misaligned plates fixed. The pack is made by ODVS and hosted by the Wing Commander Combat Information Center (CIC).
Extract the ZIP and run Install_WC3_4K_Online.bat. It backs up the files it replaces, patches your installed edition and downloads the 4K videos (about 9 GB) from the CIC; its guide explains the details. Then choose Remastered upscaled in Victory’s installer or in the launcher’s Cinematics list: the launcher shows Remastered upscaled 4K (ODVS pack) and setup prepares the videos once. If you install the pack after Victory has prepared the upscaled set, Victory notices the changed videos and prepares them again before you play. The 4K videos use AV1 and need a fast processor.
Credit
The Wing Commander III 4K Video Pack, its 4K video restoration, installer and guide are the work of ODVS, who also made the HD Video Pack for the DOS release. All credit for these cinematics belongs to ODVS. ODVS’s guide in turn credits Matt Wells (mattwells77) for the Wing Commander III Enhancement Patch and Restored Scenes compatibility file included with the pack, and VideoLAN and the dav1d contributors for AV1 playback. The Wing Commander Combat Information Center (CIC) hosts the downloads.
Victory does not include, change or redistribute ODVS’s videos. You download the pack from the CIC, and Victory plays what the pack installed on your own PC.
ODVS’s 4K Video Pack at the CIC ↗GOG DOS release
The 4K pack installs into the 30th Anniversary Edition only. With the GOG DOS release, Victory plays your original cinematics. If you already have ODVS’s HD Video Pack 2.0, Victory still imports it: see step 5.
Windows and Linux / Early alpha
3. Download Victory
The Windows download includes all five flyable fighters: Hellcat, Arrow, Thunderbolt, Longbow and Excalibur, together with enhanced widescreen Victory rooms, cockpit and MFD updates, planetary missions with the four planets ready-baked, 30th Anniversary Edition support, an experimental co-op wingman mode and the experimental campaign mission selector.
Before installing: Read exactly what setup installs and downloads, including its third-party tools and system changes.
SHA-256 checksum · Release notes and known limitations · Full changelog · Updating from an earlier alpha
Alpha 0.4.3 is out for Windows and Linux. Rescuing Dr. Severin at Alcor no longer fails when every ground target is destroyed, guns can be selected per type, all wingmen join the comms menu, and the orchestral score and edition subtitles are new. The launcher’s Update to 0.4.3-alpha (Windows, about 3.7 GB) or Check for updates (Linux, about 3.6 GB) downloads the files that changed. On Linux and Steam Deck, setup now fetches portable FFmpeg and FluidSynth when the system has none. What’s new
Alpha 0.4.2 is out for Windows and Linux. It fixes a crash to the desktop in nebula missions, lets 30th Anniversary Edition players choose their cinematics (including ODVS’s 4K pack), finds Steam copies and brings back the blue Confed engine glow on Windows. On Windows 0.4.1, the launcher’s Update to 0.4.2-alpha downloads about 145 MB; on Linux 0.4.1, Check for updates installs it too (about 127 MB). Co-op links only players on the same version, so both players update to 0.4.2.
Earlier releases remain available: Alpha 0.4.2 · Alpha 0.4.1 · Alpha 0.4 · Alpha 0.3.5 · Alpha 0.3.4 · Alpha 0.3.3 · Alpha 0.3.2 · Alpha 0.3.1 · Alpha 0.3 · Alpha 0.2 · Alpha 0.1.
This is an early alpha: expect bugs and unfinished content. Full campaign completion, physical controllers and VR have not yet been fully tested.
4. Install and prepare Victory
- Extract the entire Victory ZIP into one folder. Keep the Setup EXE and all accompanying
.binfiles together. - Run the Setup EXE. Choose where to install Victory, then select your original WC3 folder: the GOG DOS folder containing
DATA.DAT, or the 30th Anniversary Edition’s main folder. - Approve the Microsoft Visual C++ runtime prompt if shown. This installs or updates a shared Windows component required to run Victory.
- Leave the installer open until preparation finishes. It shows the current step, a progress bar and the time so far. Setup downloads its media tools, prepares missions, music, sound, original cinematics and comm videos from your original game, and installs the four planets that ship ready-baked with Victory. With the 30th Anniversary Edition the installer first asks which cinematics to play (Remastered, Remastered upscaled or the original 1995 set); setup then prepares that set and the edition’s HD comm videos. Allow 20 minutes or more. Setup also installs the included upscaled room artwork and AI-created widescreen extensions. These rooms do not need the optional HD video pack. Your original files are read without being changed.
Upgrading from an earlier alpha
From Alpha 0.4, 0.4.1 or 0.4.2, choose Update to 0.4.3-alpha in the launcher. Otherwise close Victory and run the Alpha 0.4.2 installer in your existing Victory folder. Your saves, control profiles and imported videos are kept. See Updating to Alpha 0.4.3 for the step-by-step guide.
What is added to your PC?
The installer adds the Victory game, its supporting libraries and a private Python interpreter to the folder you chose. It creates Start menu shortcuts and an uninstall entry; a desktop shortcut is optional.
Setup also automatically downloads FFmpeg for media conversion and FluidSynth with the GeneralUser GS soundfont for music. These tools stay in Victory’s own user-data folder. They are not installed as system-wide applications. The planets now ship ready-baked, so setup no longer downloads NumPy, SciPy, Numba or llvmlite.
Downloaded tools, generated data and setup logs are stored under %USERPROFILE%\.local\share\star-agent-wc3. Your original game files are processed locally and are not uploaded. Victory does not add background services or permanently change your PATH.
Full installer details: components, download sources, folders and removal
5. Already have ODVS’s HD Video Pack 2.0? Import it
This step is only for the GOG DOS release, and only if you already have the pack. With the 30th Anniversary Edition, skip it.
- Staying on Alpha 0.1? Download and run the small HD Video Update, selecting your existing Victory folder. Alpha 0.4 already includes this fix; do not apply the separate updater to Alpha 0.4.
- Open Victory and choose Import HD pack in the launcher. The Start menu’s Import HD Videos shortcut also works.
- Select your HD Video Pack 2.0 language ZIP. Do not extract or rearrange its contents.
- Leave the import window open until it says the video clips are ready, then choose Play in the launcher.
The importer keeps the video quality unchanged. Where needed, it converts audio locally to AAC using the FFmpeg tool already downloaded by setup. It does not install a system codec. Allow space for the imported videos in addition to the downloaded ZIP.
Re-importing the same pack skips completed clips. If you want to switch languages, close Victory and move your existing %USERPROFILE%\.local\share\star-agent-wc3\fmv-cache\engine folder to a backup location first, then import the other pack. Different existing videos are not overwritten. The cd1188 English pack is also supported.
The English packs checked do not include the Victory fleet’s two jump shots; Victory uses your original cinematics wherever an HD replacement is missing. HD videos are optional and are not downloaded automatically.
6. Start playing
Open Victory from the Start menu or your desktop shortcut. The launcher shows which content is ready. Choose Set up / repair if original-game preparation is incomplete, or Import HD pack if you have ODVS’s HD Video Pack 2.0 (not needed with the 30th Anniversary Edition, whose cinematics you choose in the Cinematics list). Original cinematics work without the HD pack. Choose PLAY when preparation is complete. If something goes wrong, Send logs to developers sends the game and setup logs, with your account and computer names removed, only when you choose it, and gives you a short code to pass on.
When it opens, the launcher checks victorywc3.info for a newer release. From Alpha 0.4 on, Victory can install later releases itself: Update to … downloads only the files that changed, checks the release signature and every file’s checksum, and restores the previous files if anything fails. Nothing is updated until you click, and no game files or profiles are sent. Releases published without an update package are offered as a link to this page instead.
Experimental co-op wingman
Aboard the Victory, open the pause prompt and choose CO-OP. Log in with a nickname, then open a game or join a friend’s from the list or with its code. Your friend flies as your wingman in your missions and follows the story with you. Both players need the same version (Alpha 0.4.3). Co-op has been tested with two games on one PC; play across two home networks is not yet verified.
Testing campaign missions
Visit the recreation room, open the simulator and select DEV CAMPAIGN. Choose a mission to test without changing your campaign progress. Unavailable missions are disabled.
Experimental VR
Connect your headset and configure your PC’s OpenXR runtime, then choose Play in VR in the launcher. The Victory VR (experimental) Start menu shortcut opens the launcher with VR selected. Start Meta Quest Link or your other PC OpenXR runtime and enter its VR dashboard before launching. Meta Link playback has been confirmed in a Windows test setup; performance and broader headset/controller compatibility remain under test. Virtual Desktop is not yet verified.
If setup fails
If an earlier alpha failed while preparing the original game, run the Alpha 0.4.3 installer and select the same original WC3 folder. You do not need to reinstall WC3 or download your HD videos again.
Check the logs in %USERPROFILE%\.local\share\star-agent-wc3\install-logs, then run setup again to retry incomplete steps. Do not launch the game until preparation finishes successfully.
Uninstalling
Use Uninstall Victory from the Start menu. This removes the application and shortcuts but keeps saves, downloaded tools, generated data and imported videos. It also leaves the shared Microsoft Visual C++ runtime and your original WC3 installation in place. See the removal instructions before deleting saved data manually.
From Alpha 0.4.2 or earlier
Updating to Alpha 0.4.3
Alpha 0.4.3 installs over your existing Victory. Your saves, control profiles, imported HD videos and prepared game data are kept; you do not need to reinstall Wing Commander III or download your HD videos again.
Windows
From Alpha 0.4.2, 0.4.1 or 0.4: open the Victory launcher and choose Update to 0.4.3-alpha. From 0.4.2 it downloads the 22 files that changed (about 3.7 GB); from 0.4 it downloads 30 files (also about 3.7 GB). It checks the release signature and every file, keeps your previous files until the update is complete, then prepares the new release and opens the launcher again. If you prefer the installer, or you are on 0.3.5 or earlier, use the steps below.
- Close Victory and its launcher.
- Download the Alpha 0.4.3 ZIP and extract all of it into one new folder. Keep
Victory-Alpha-0.4.2-Setup.exeand its three.binfiles together. - Run
Victory-Alpha-0.4.3-Setup.exe. It finds your existing Victory folder; keep that folder. Select your original WC3 folder again, or select the 30th Anniversary Edition’s folder to switch to the edition’s cinematics; the installer then asks which cinematics to play. - Leave preparation running until it finishes. It installs the ready-baked planets and anything new in this release, and reuses everything already prepared.
- Open Victory. The old Victory Alpha 0.3.x shortcuts are replaced by a single Victory shortcut.
Linux
From Alpha 0.4.2, 0.4.1 or 0.4: open the Victory launcher, choose Check for updates and confirm. From 0.4.2 it downloads the 29 files that changed (about 3.6 GB). It checks the release signature and every file, installs 0.4.3 next to your current release and then switches over; your previous release stays. Otherwise use the archive:
- Download the Alpha 0.4.3 Linux archive, extract it and run
sh ./install.shas your normal user (no sudo). - The installer places 0.4.2 next to your previous release and switches Victory to it. Your data in
~/.local/share/star-agent-wc3stays where it is. - Open Victory and choose Set up / repair once if the launcher shows anything as not ready. The Linux setup no longer downloads Python packages from PyPI.
Good to know
- Already using the GOG DOS release and now own the 30th Anniversary Edition? The launcher offers Use 30th Anniversary Edition when it finds the edition. Prepared data is kept and the edition’s cinematics and comm videos are added.
- Controls: your bindings carry over. New controls: a Clear button beside every binding, and reset options in each action’s Details.
- 30th Anniversary Edition: the launcher’s Cinematics list switches between Remastered, Remastered upscaled (ODVS’s 4K pack when installed) and the original cinematics. A set that is not prepared yet is prepared after you confirm.
- Co-op links only games on the same version: both players need Alpha 0.4.3.
- Future updates: from 0.4 on, the launcher can install later releases in place with Update to …, downloading only the changed files.
Release history
Changelog
Alpha 0.4.3 — Alcor rescue fixed, gun selection, all wingmen in the comms menu, orchestral score, subtitles · 15 November 2026
- Alcor rescue fixed: destroyed tanks and other ground targets were not counted, so rescuing Dr. Severin failed even with every target destroyed and the campaign took the losing path. They count now; Freya’s shield generator and the Hyperion and Kilrah targets get the same fix. If your campaign took the losing path at Alcor, load a save from before that mission.
- Guns: the next-gun key (G with the classic keys, K with Victory’s own) steps through full guns, then each gun type alone. F still selects full guns, and the cockpit’s GUN SELECT knob does the same.
- VR: point the laser at a gun on the weapons display and pull the trigger to switch that gun type on or off (the Excalibur’s four tachyon guns switch together). Power bars step 5% per half, and whatever the laser points at gets a large label.
- Capital ships break up from where the killing shot hit: fire runs through the hull to the reactor and burnt sections drift away. Fighters tumble and break apart, named Kilrathi aces air their death line, and Howard Day made new explosion artwork.
- Wingmen: every wingman flies, including second and third wingmen. The comms menu (C) lists each friendly ship by name with its own orders, as in the original game.
- The Hellcat wears its original olive green. The Victory’s side-bay lamps are toned down, and a hexagonal force field shimmers across both flight-deck openings.
- Orchestral score: George Oldziey’s orchestral recordings from albums you own can replace the in-flight music (choose Orchestral score in the launcher). Albums are never included.
- Subtitles: OPTIONS > SUBTITLES shows the 30th Anniversary Edition’s own subtitles under the cinematics (English, Deutsch or Français). Off by default.
- Parts of the Confed depot no longer appear plain grey. From 0.4.2 the launcher downloads the 22 files that changed, about 3.7 GB. On Linux, Check for updates downloads the 29 files that changed, about 3.6 GB. Co-op needs both players on the same version.
- Linux and Steam Deck: setup no longer stops on a missing FluidSynth or FFmpeg. When the system has none (SteamOS), it downloads pinned portable builds and checks their SHA-256.
Alpha 0.4.2 — nebula crash fixed, choose your cinematics, Steam copies · 13 November 2026
- Crash in nebula missions fixed: on Windows, 0.4.1 could close to the desktop a few seconds after launch in a nebula, for example in the Caliban system. While placing the wingtip vortices in the gas, the game read ship data it had already released. The vortices now start from each ship’s outline. Thanks to the player who sent their logs.
- Choose your cinematics (30th Anniversary Edition): Remastered, Remastered upscaled or the original 1995 cinematics. The installer asks, and the launcher’s Cinematics list changes it later. Victory prepares only the set you choose. Until now it always used the edition’s remastered source masters.
- ODVS’s 4K Video Pack: when it is installed in your edition, Remastered upscaled plays its 4K versions. If the edition’s videos change, setup prepares them again. See step 2 for the download.
- Steam: the installer and the launcher find Wing Commander III from Steam by themselves, in any Steam library.
- Confed engines on Windows: the blue nozzle glow is back instead of dark grey cones. The new drive plume draws incorrectly with Direct3D 12 and stays off on Windows until that is fixed.
- Launcher: Video packs opens the video section of this page.
- Updating: on Windows 0.4.1 the launcher downloads the 12 files that changed, about 145 MB. Linux now updates from the launcher too (since 13 November): from 0.4.1 the 18 files that changed, about 127 MB. Co-op needs both players on 0.4.2.
Alpha 0.4.1 — smoother on Windows, new launcher, setup progress · 11 November 2026
Windows on 11 November, Linux on 12 November.
- Windows stutter fixed: a short freeze about once a second, everywhere in the game (aboard the Victory, in cinematics and in flight). The game asked Windows for newly connected flight sticks every second, and on some systems that question takes a tenth of a second or more. It now asks at start and when a device is plugged in or removed. If you still see a regular freeze, please send your logs from the launcher.
- Setup shows its progress: while your original game is prepared, the installer and the launcher show the step, a progress bar, the time so far and the last finished item. Re-encoding the original cinematics is still the long step; you can now see that it is working.
- Reporting a problem: the launcher has Open game log and Send logs to developers. Sending happens only when you choose it. It says what is sent, removes your account name, computer name and machine identifiers, lets you look at the files first and gives you a short code to pass on. Reports are deleted after 30 days.
- New launcher: the Victory Streak mark and the carrier, one PLAY button, the other actions grouped (game data, updates, help) and a checklist that shows in colour what is done, what still needs you and what is optional.
- Co-op landing: a guest who flew the approach with AUTO could not land on the Victory. The landing-gear speed limits now count against the moving carrier and the guest touches down by the same rule as the host.
- VR (experimental, not yet tried on a real headset): Valve Index, HTC Vive wand and Windows Mixed Reality hand controllers work with the default controls (before, only Quest Touch did); Options > Graphics has a headset resolution setting (auto, 50–100 %) and shows the detected headset and controllers; the launcher no longer limits headsets to 60 frames per second. Please send your logs if a controller does nothing.
- Space and nebula: darker shadows and hull midtones in the sortie; in the nebula, ships shed twisting vortices from their edges.
- Co-op needs the same version on both sides: a player on 0.4.1 and a player still on 0.4 cannot fly together until both are on 0.4.1.
Alpha 0.4 — 30th Anniversary Edition, co-op wingman, original combat rules · 9 November 2026
The full changelog since Alpha 0.3.5. A planned 0.3.6 was never published; its changes are part of 0.4. Read the release post on the devblog.
Wing Commander III 30th Anniversary Edition
- One installer for both editions: select the GOG DOS release (the folder with
DATA.DAT) or the 30th Anniversary Edition’s folder. - Remastered cinematics: with the 30th Anniversary Edition, setup uses its cinematics from the recovered master tapes (1080p), including both jump shots and the lift. Setup uses the source masters, not the edition’s AI-upscaled set. The community HD pack is not needed.
- HD talking heads: the Victory’s and other scripted calls, and every wingman and Kilrathi ace line, show the edition’s HD comm videos. All original DOS radio lines are kept.
- Switching editions: the launcher offers Use 30th Anniversary Edition when it finds the edition, keeping your prepared data. The DOS release works exactly as before.
Co-op wingman (experimental)
- Lobby: choose CO-OP on the pause prompt aboard the Victory, log in with a nickname, and open a game or join one from the list or by code.
- The mission together: your friend flies as your wingman. Shots, hits, radio calls and capital-ship fire reach both games; autopilot and landing work for both.
- The story together: your friend’s rooms follow yours, the cinematics play in both games and your friend makes the wingman choice.
- Games find each other through victorywc3.info and connect directly where the network allows. Both players need Alpha 0.4. Tested with two games on one PC so far.
Combat by the original rules
These rules come from the original Wing Commander III program itself.
- Enemy pilots turn like WC III fighters (no drifting momentum), fire far fewer missiles, use decoys at WC III odds and steer away instead of ramming head-on.
- Wingmen launch missiles and decoys and aim their guns.
- Missiles leave at the launcher’s speed and accelerate, turn at WC III rates, and lose targets that leave their seeker cone.
- Confed destroyers and cruisers in the original missions now fight the Kilrathi.
- Flight HUD: marks only your wingman and your target, plus the Temblor bomb’s target on Kilrah and Hyperion, and none on other contacts or turrets. Speed and target readouts stay on the display in the cockpit view.
- The Ekapshi’s target display shows its own picture, and the Ekapshi now has its own model.
Missions and the Victory
- Later campaign missions: refuelling-depot sorties with the depot and its force field, AI-flown Excaliburs, and voiced in-flight continuations, including Thrakhath’s speech and the Victory’s return call.
- Duty logs: 68 logs on the Victory’s terminals, with scrollable lists.
- Capital ships: Kilrathi capital ships with WC III loadouts, the dreadnought with WC III’s own figures, lit windows on the Kilrathi transport and carrier, and the Confed escort destroyers at their 300 m size.
- Victory hangar bays: reworked bay walls and collisions, so fighters no longer catch on bay fixtures.
Planets
- Entry: descending to a planet plays WC III’s own entry cinematic again.
- Freya: an ice plain with angular ice fields, sharp ice shards and drifting snow; a shorter entry that pushes in over the canopy, and a level autopilot.
- Alcor: a sandstone desert under a tan dust sky, with sand thrown up by low-flying ships.
- Hyperion: a barren fault desert with banded, gullied cliffs.
- Kilrah: a lava world: a lava river down the trench, lavafalls and volcanoes, and a city of lit blocks, red-banded ziggurats and rail traffic.
- Ready-baked: the four planets ship with the installer. Setup no longer computes terrain or downloads tools for it, which makes first-time setup much faster.
Space
- Nebulae: near mist, vapour trails behind ships, and cloud masses with openings in Ariel and Caliban.
- Asteroids: the new “Grey Field” theme with grey, pitted rocks.
Fighters
- Excalibur: a new exterior (revision 87) at the game’s scale, with the reviewed cockpit.
- Hellcat V: a new livery; the GUN SELECT display follows the knob.
- Thunderbolt VII: a paint round with the shark mouth, stripe, grilles and a less mirror-like finish.
- Longbow: weapon bays at the right scale and lighter exhaust soot.
Controls
- Clear: a Clear button beside every binding on the controls list; on a controller press Y, on the keyboard Delete.
- Resets: each action’s Details offers “clear all slots” and “reset to default”; the controls page offers “Reset all to defaults” for a device, with a confirmation. Keyboard, mouse and controller all reach them.
- Classic keyboard: new keyboard profiles start with the classic WC III layout.
- Fixed: after resetting the controls to the original Wing Commander keys, a mouse movement could freeze the controls page (0.3.5).
Launcher and setup
- Updates: the launcher checks for a new release when it opens and, from 0.4 on, can install later releases in place: only changed files are downloaded, the release signature and every file are checked, and the previous files are restored if anything fails.
- Shortcuts: one Victory shortcut replaces the per-version ones.
- Linux: setup no longer installs Python packages from PyPI.
Tested for this release: the Windows build and installer, an upgrade install over Alpha 0.3.5, the four planets installed from the release, and the rooms and a Hellcat launch on Windows, plus native Linux builds and automated controls checks. Physical controllers, VR and full-campaign play are still being tested. Known issue under investigation: opaque engine plumes reported on one Windows system.
Alpha 0.3.5 — flight-stick detection and axis direction
- VKB detection: fixed identification getting stuck while devices settle after opening. Retrying detection keeps working device connections.
- Confirming devices: mouse clicks and Enter/A now confirm the detected stick; Escape/B cancel.
- Axis inversion: axis Details now clearly shows an Invert axis switch. New flight-stick roll assignments use the reversed direction by default following VKB twist feedback. Existing saved bindings are preserved.
To change an existing roll binding: open Controls, choose Flight sticks / HOTAS, select the Flight category and Roll axis, then open Details (...) and toggle Invert axis. Bindings save automatically. Other axes can be inverted in the same way.
Alpha 0.3.4 — flight devices and animated room stars
- Flight devices: broader joystick discovery and corrected Windows twist and rotation mapping. Identify a device by moving an axis or pressing a button; skip devices you do not use.
- Pedals: assign independent pedals alongside a single stick, HOTAS or dual sticks, and save the bindings in your profiles.
- Experimental TrackIR on Windows: cockpit head tracking with recenter, enable/disable and sensitivity controls under Controls > Views. Start the TrackIR software first. This release uses its SDK profile; physical hardware testing is ongoing. VR continues to use headset tracking.
- Room stars: animated stars enabled by default, blacker space and coverage across the widescreen windows. Corrected bridge and gunnery movement, including the concentrated stars on entering gunnery. Use Options > Graphics > Room Stars to switch the effect on or off.
- Room animations: setup upgrades older caches to include every frame while retaining saves, profiles and imported videos.
Help improve device support
Save a controller profile in Controls and share its profile-N.json file in the existing Victory Discord channel. Find it in %USERPROFILE%\.local\share\star-agent-wc3\control-profiles on Windows, or ~/.local/share/star-agent-wc3/control-profiles on Linux. Include your device models, single-stick/HOTAS/dual-stick setup, pedals, operating system and which functions you tested. Mention any firmware or manufacturer-software axis changes. Share only the exported profile. Reviewed profiles may become optional presets later. Save your own bindings in another slot before loading someone else’s profile.
Alpha 0.3.3 — enhanced widescreen rooms and VR startup
- Enhanced rooms included: upscaled Victory room artwork with AI-created widescreen extensions is installed automatically, including the matching layouts for animated characters and controls. The launcher reports whether the rooms are ready.
- VR startup: fixed Play in VR opening the game without enabling the engine’s VR mode.
- Upgrades: existing saves, control profiles and imported cinematics are retained. Enhanced rooms are separate from the optional HD cinematic pack.
Alpha 0.3.2 — controls, launcher and original cinematics
- Clearer controls: device tabs, category navigation, readable bindings, conflict warnings and saved profiles.
- Full axes and separate directions: configure throttle, pitch, yaw, roll, strafe and vertical thrust as a full axis, separate buttons, or both. Moving a stick captures its axis correctly.
- Flight sticks: generic stick support and movement-based left/right identification for dual-stick setups. Physical compatibility testing is ongoing.
- Mouse MFD controls: F11 or middle mouse toggles the cockpit cursor. Click guns, missile racks, comms choices and power controls.
- Options navigation: directional controls follow the visible columns and bottom button bar.
- Original cinematics: setup prepares videos from your own WCIII installation. HD videos take priority where available; originals fill missing clips.
- Launcher: installation status, preparation/repair, optional HD import, desktop/VR launch and a Check for updates button.
- Setup: remembers a valid original-game folder and detects GOG installations.
Alpha 0.3.1 — Windows setup repair
- Fixed a long extraction path that could stop FluidSynth installation before original-game preparation started.
- Setup now writes diagnostic logs from the beginning, including dependency download and extraction failures.
- The repair is included in the installer; no separate repair is needed. Existing saves, imported HD videos and completed preparation are kept.
- Game content and ship models are unchanged from Alpha 0.3.
Alpha 0.3 — cockpit startup and interactive MFDs
- Arrow: restored the original hull and missile-bay proportions, with smaller visible missiles and unchanged weapon performance.
- Mission startup: green system checks on a cockpit display while loading, followed by the startup sound. VR uses a helmet startup display.
- Weapons: original-style combined guns and missiles page. Arm missile bays independently to fire a salvo; select gun groups or full guns.
- VR interaction: point at the MFD and use the trigger to select guns, toggle missile racks, choose radio recipients and orders, or adjust and lock power allocations.
- Controller layout: a separate Xbox controller diagram in Controls shows your current assignments, including remapped buttons and combinations.
- Simulator: the DEV CAMPAIGN button now uses the red terminal style and aligns with the other controls.
- Communications: the MFD opens on radio targets, with the original-style choices and no conversation-history panel.
- HD cinematics: corrected the bridge and gunnery entry/exit clip mapping for imported HD videos. Existing imports do not need to be repeated.
Alpha 0.2 — HD videos, simulator and landing
- Access campaign missions through the simulator for testing without changing campaign progress.
- Launch and fly with normal controls: lowering the landing gear no longer switches to VTOL. A launch prompt shows the gear control.
- Speed is limited to 100 KPS while the gear is down or retracting.
- With landing clearance, recover inside the landing area at 0–5 KPS with the gear fully lowered. No height scan is required; the landing marker is raised for visibility.
- Import ODVS video packs directly from their downloaded ZIPs.
- Convert incompatible audio automatically while preserving the original HD video quality.
- Resume completed imports safely and protect existing clips from accidental replacement.
The small HD Video Update updates the importer and movie-playback setting, keeping backups of the previous importer and launcher. It does not change your game assets, saves or installed videos.
Alpha 0.1 — first release · 26 October 2026
- Five flyable fighters: Hellcat, Arrow, Thunderbolt, Longbow and Excalibur. Includes updated Hellcat and Excalibur models.
- Ships and cockpits: updated fighter scaling, cockpit details, lighting and MFD layouts, plus a more readable font.
- Space and planetary missions: nebulae and asteroid updates, with local terrain preparation for Alcor, Freya, Hyperion and Kilrah.
- Campaign testing: Choose campaign missions from the simulator’s DEV CAMPAIGN menu without changing your campaign progress. Includes continuation missions; an unavailable mission is disabled. Some missions remain unfinished or untested.
- Temporary ship representations: Hobbes flies a Thunderbolt; the unfinished dreadnought uses a Fralthi II stand-in. Ekapshi still uses a Dralthi stand-in.
- Windows installation: installer, original-game data preparation, optional HD video import and an experimental OpenXR shortcut.
See the known limitations for known issues and validation limits, and installer details for every third-party component.